User's Manual

Getting Started

Basic Network Settings

If your phone cannot contact a DHCP server for any reason, you need to configure a

static IP address manually.

To configure a static IP address via phone user interface:

1. Press Menu->Setting->Advanced Settings (password: admin) ->Network->WAN

Port->Static IP Client.

2. Enter the parameters: IP, subnet mask, default gateway, primary DNS, second DNS

in the corresponding fields.

3. Press the Save soft key to accept the change or the Back soft key to cancel.

If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE

mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP

negotiation to obtain the IP address. Contact your system administrator for the PPPoE

username and password.

To configure PPPoE via phone user interface:

1. Press Menu->Setting->Advanced Settings (password: admin) ->Network->WAN

Port->PPPoE IP Client.

2. Enter the username and password in the corresponding fields.