User's Manual

Advanced Phone Features
95
BLF List
You can use the BLF List feature to monitor a list of users defined by your system
administrator. For example, your system administrator enables BLF List, and creates a
BLF List URI (e.g., [e-mail]) including a list of user1, user2 and user3 on the
server. The BLF List keys on the IP phone can present the status of user1, user2 and user3.
The key LEDs illuminate either flashing or solid depending on the status of those users. For
more BLF List key LED indications, refer to LED Instructions on page 5.
You can use the BLF List keys in the following ways:
z When the monitored user is idle, press the BLF List key to dial out the phone number.
z When the monitored user receives an incoming call, press the BLF List key to pick up
the call directly.
z When there is a conversation on the monitored user, press the BLF List key to barge
in and set up a conference call.
To configure the BLF List settings via web user interface:
1. Click on Account.
2. Select the desired account from the Account field.
3. Click on Advanced.
4. Enter the BLF List URI in the BLF List URI field.
5. (Optional.) Enter the BLF pickup code in the BLF List Pickup Code field.
6. Click Confirm to accept the change.
Note
To assign BLF List keys via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select BLF List from the Type field.
For more information about the BLF List pickup, contact you
r
system administrato
r
.
You can configure the BLF List settings via web user interface only.