User's Manual

User Guide for the SIP-T48G IP Phone
96
1. Press Menu->Call Features->Auto Answer.
2. Select the desired line and then press the Enter soft key.
3. Press or , or the Switch soft key to select Enabled from the Auto Answer
field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the LCD screen.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
#WVQ4GFKCN
You can enable auto redial to redial the phone number automatically when the called
party is busy. You can also configure the times settings for auto redial and the time to
wait between redial attempts.
To configure auto redial via phone user interface:
1. Press Menu->Call Features->Others->Auto Redial.
2. Press or , or the Switch soft key to select Enabled from the Auto Redial field.
3. Enter the desired time (in seconds) in the Redial Interval field.
The default time interval (in seconds) is 10.
4. Enter the desired times in the Redial Times field.
Auto answer is only applicable when there is no other call in progress on the phone.