User's Manual

Getting Started
19

2JQPG+PKVKCNK\CVKQP
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The LCD screen
displays "Initializing…Please wait" during this process
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4
network settings (e.g., IP address, subnet mask, default gateway address and DNS
address) by default.
Note
2JQPG5VCVWU
You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
z Network status (e.g., IPv4 status, IPv6 status, IP address mode and MAC address).
z Phone status (e.g., device model, firmware version and product ID).
z Account status (e.g., register status of SIP accounts).
To view the phone status via phone user interface:
1. Press , or press Menu->Status.
2. Press or to scroll through the list and view the specific information.
To view the phone status via web user interface:
If your network does not use DHCP, proceed to Basic Network Settings on page 15.