User's Manual

Customizing Your Phone

Label (key label displayed on the LCD screen)

Value (the number you want to forward to)

Usage:

1. Press the DSS key to forward an incoming call to the number specified in the Value

field.

2. When call forward is in phone mode, press the DSS key to activate call forward for

the phone.

3. When call forward is in custom mode, press the DSS key to access the custom call

forward interface. You can activate or deactivate call forward for one or all

accounts.

Note

Transfer

You can use this key feature to handle the call differently depending on the transfer

mode on DSS key when there is an active call on the phone.

Dependencies: Type (Key Event)

Key Event (Transfer)

Label (key label displayed on the LCD screen)

Value (the number you want to transfer to)

Usage:

z When the transfer mode on DSS key is Blind Transfer, press the DSS key to complete the

blind transfer to the number specified in the Value field.

z When the transfer mode on DSS key is Attended Transfer, press the DSS key to dial out

the number specified in the Value field, and then perform the attended or

semi-attended transfer.

z When the transfer mode on DSS key is New Call, press the DSS key to place a new call

to the number specified in the Value field.

Note

Hold

You can use this key feature to place an active call on hold or retrieve a held call.

Transfer mode via DSS key is configurable via web user interface at the path

Features->Transfer. For more information on how to configure the transfer mode via DSS

key, refer to Busy Lamp Field (BLF) on page 116.

When leaving the Value field blank, the DSS key performs the same as the TRANSFER key

or the Transfer soft key during a call. For more information, refer to Call Transfer on page

104.

If the Value field is left blank, the DSS key performs the same as the Forward soft key

when receiving an incoming call.

When call forward is activated, the forward key LED will illuminate solid green.