User's Manual
User Guide for the SIP-T48G IP Phone
78
#EEQWPV/CPCIGOGPV
You can register one or multiple accounts on the SIP-T48G IP phone. You can also
configure each line key to associate with an account or configure multiple line keys to
associate with an account.
#EEQWPV4GIKUVTCVKQP
To register an account via phone user interface:
1. Press Menu->Advanced (password: admin) ->Account.
2. Select the desired account and then press the Enter soft key.
3. Select Enabled from the Account Status field.
4. Enter the desired values in Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 fields respectively. Contact your system administrator
for more information.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
You can repeat steps 2 to 5 to register more accounts.
The following figures show single or multiple accounts registered on the phone:
Single account:
Multiple accounts: