Enterprise IP Phone SIP-T61 & T61P & T61G Quick Start Guide (V80.1) Applies to firmware version 47.0.80.1 or later.
Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator. Handset Cord IP Phone Handset Stand Ethernet Cable Quick Start Guide Wall Mount Bracket Power Adapter Note: The models displayed on the phone differ from each other. The packaging content "IP Phone" listed above takes a SIP-T61P IP phone as an example. Assembling the Phone 1.
. Connect the network and power, as shown below: You have two options for network and power connections. Your system administrator will advise you on which one to use. PC Connection (Optional) Power Adapter (DC 5V) A AC Power Option B PoE ( Power over Ethernet ) Option PC Connection (Optional) IEEE 802.3af compliant PoE Hub/Switch Note: If inline power (PoE) is provided, you do not need to connect the power adapter. Make sure the hub/switch is PoE-compliant.
Configuring Your Phone Configuring via web user interface Accessing the web user interface: 1. Press when the phone is idle to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and then press Enter. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Basic Call Features Placing a Call Using the handset: 1. Pick up the handset. 2. Enter the number, and then press the Send soft key. Using the speakerphone: 1. With the handset on-hook, press . 2. Enter the number, and then press the Send soft key. Using the headset: 1. With the headset connected, press to activate the headset mode. 2. Enter the number, and then press the Send soft key.
If there is more than one call on hold, press or to select the desired call, and then press Resume soft key. Call Transfer You can transfer a call in the following ways: Blind Transfer 1. Press or the Tran soft key during a call. The call is placed on hold. 2. Enter the number you want to transfer to. 3. Press or the Tran soft key. Semi-Attended Transfer 1. Press or the Tran soft key during a call. The call is placed on hold. 2. Enter the number you want to transfer to, and then press 3. Press .
Voice Message Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The MESSAGE key LED lights up. To listen to voice messages: 1. Press or the Connect soft key. 2. Follow the voice prompts to listen to your voice messages. Customizing Your Phone Call History 1. Press the History soft key when the phone is idle, press 2. Select an entry from the list, you can do the following: Press the Send soft key to call the entry.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
