Yealink IP DECT Phone W56P & W56H Quick Start Guide(V80.1) www.yealink.com Applies to firmware version 25.80.0.1 or later.
Packaging PackagingContents Contents The following items are included in your W56P package: Base Station Handset Belt Clip Ethernet Cable Charger Cradle Rechargeable Battery Two Power Adapters Quick Start Guide The following items are included in your W56H package: Handset Charger Cradle Power Adapter Belt Clip Rechargeable Battery Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance.
2. Insert the battery into the handset, as shown below: battery 3. Connect the charger cradle and charge the handset, as shown below: Note: The handset should be used with original power adapter (5V/600mA) only. The use of the third-party power adapter may cause the damage to the handset. The charging status of the handset is indicated in the top right-hand corner of the LCD screen. 4. (Optional) Mount the charger cradle on the wall, as shown below: 36.00mm 36m m 1:1 5.
Getting Started Getting Started Shortcuts This helps you get quick access to features by pressing the shortcut keys directly without having to scroll through the menu.You can press the following predefined shortcut keys to access some frequently used features when the handset is idle: 1 Press the left soft key to access the call history. 2 1 2 Press the right soft key to check the line status. 3 Press to place an internal call. 3 5 4 Press 4 to decrease the ringer volume.
Basic Operations Basic Operations Turning Handset On/Off To turn the handset on, do one of the following: Press , then the LCD screen lights up. Place the handset in the charger cradle. The handset will be turned on automatically. To turn the handset off: Long press to turn the handset off. Locking/Unlocking Keypad Long press when the handset is idle to lock the keypad. Long press again to unlock the keypad. Silent Mode Long press when the handset is idle to switch the silent mode to On.
To delete a contact: 1.Press the OK key to enter the main menu, and then select Directory. 2.Press or to highlight the desired entry. 3.Press the Options soft key, and then select Delete to delete the selected entry. To assign a speed dial number: 1.Press the OK key to enter the main menu, and then select Settings->Telephony->Speed Dial. 2.Press or to highlight the desired digit key, and then press the Assign soft key. 3.Press or to highlight the desired entry, and then press the OK soft key.
Ending Calls Press . Call Mute Press Press during a call to mute the call. again to un-mute the call. Call Hold and Resume To place a call on hold: Press the Options soft key during a call, and then select Hold. To resume a call, do one of the following: If there is only a call on hold, press the Resume soft key. If there are two calls on hold, press the Resume soft key to resume the current call. Press the Swap soft key to swap between calls.
About us Founded in 2001, Yealink, a leading provider of VoIP Phone and IP communication solutions, has been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price for more than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the value of network communications.
Privacy of communications may not be ensured when using this phone. FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.