User's Manual
To delete a contact:
1.Press the OK key to enter the main menu, and then select Directory.
3.Press the Options soft key, and then select Delete to delete the selected entry.
Placing Calls
To place a call from the local directory:
To place a call from the call history:
To assign a speed dial number:
1.Press the OK key to enter the main menu, and then select Settings->Telephony->Speed Dial.
1.Press the History soft key when the handset is idle, and then select the desired call history list.
To place a call directly:
To place a call using the speed dial key:
Long press the speed dial key to place a call to preset number directly.
Answering Calls
To answer a call, do one of the following:
Press the Accept soft key.
2.Press or to highlight the desired entry.
2.Press or to highlight the desired digit key, and then press the Assign soft key.
1.Press when the handset is idle.
Enter the desired number when the handset is idle.
2.Press or to highlight the desired entry, and then press or to dial out using the default line.
To place a call from the redial list:
1.Press or when the handset is idle.
2.Press or to highlight the desired entry, and then press or .
Press .
Press .
3.Press or to highlight the desired entry, and then press the OK soft key.
If both the office number and mobile number are stored, press or to highlight the desired number,
and then press the OK soft key again.
If multiple numbers for the contact are stored, press or to highlight the desired number, and then
press or again to dial out using the default line.
5
2.Press or to highlight the desired entry, and then press or to dial out using the default line.
Press .
Basic Call Features
Note:
You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by pressing .
Press to enter the pre-dialing screen.
Enter the desired number using the keypad.
If there are multiple lines assigned to your handset as outgoing lines, press the Line soft key to select the
desired line. If you do not select a line, the handset uses the default outgoing line to dial out.
2.Press , or to dial out.
1.Do one of the following: