USB & Bluetooth Speakerphone Quick Start Guide (V1.
Package Contents CP700 Carrying Case BT50(optional) Quick Start Guide Charging Your CP700 Plug the CP700 into a USB power source. The CP700 battery lasts for up to 9 hours of talk time and takes approximately 3 hours (5V/500mA) to fully charge. PC Viewing the Battery Status Tap to view the battery status.
Extremely low on power, flashing red Low battery Connecting Your CP700 Connect to PC via USB Cable PC Connect to PC via Bluetooth Connect the BT50 into a USB port on your PC. The CP700 and the BT50 are pre-paired and ready to use out of the box. The Bluetooth range is 30m/100ft. PC Note: If there is no sound coming from your CP700, you may need to set the CP700 as the playback device in your operating system’s audio settings.
To disconnect, double-tap To reconnect, tap again. . Note: You can connect your CP700 to 2 Bluetooth devices at the same time. Using Your CP700 Power On/Off Bluetooth Button Volume Down Answer Call Mute Button Volume Up End Call Teams Button/ Voice Assistant The CP700 is compatible with Microsoft Teams/Skype for Business client and Yealink VCD client. The CP700 can connect to PC via USB cable or Bluetooth, and to smartphone via Bluetooth. After connected, you can control the calls on the CP700.
Task Do Power on or off Hold Answer a call Tap . End or reject a call Tap . Volume up/down Tap Mute/unmute microphone During a call, tap . The mute LED indicator and LED light-ring glow red. Hold a call During a call, tap flashes green. Reset to the factory Hold Play/pause the music for 3 seconds. / . and . The LED light-ring for 6 seconds. When the connected smartphone is playing music, tap to pause. Tap again to resume.
Teams Button functions Do Task Activate Cortana/Activate your smartphone’s voice assistant Hold Invoke the Teams client After the Teams client connects , tap . for 2 seconds. Note: Before using the Teams button functions, you should install the Microsoft Teams client on your PC or smartphone.
Regulatory Notices Operating Ambient Temperatures Operating temperature: +32 to 104°F (0 to 40°C) Relative humidity: 5% to 90%, noncondensing Storage temperature: -22 to +160°F (-30 to +70°C) Warranty Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party.
