Specifications

User Guide for the CP860 IP Conference Phone
12
Power over Ethernet
With the included or a regular Ethernet cable, the CP860 IP conference phone can be
powered from a PoE-compliant switch or hub.
To connect the PoE:
1. Connect the Ethernet cable between the Internet port on the phone and an
available port on the in-line power switch/hub.
Note
You can connect optional expansion microphone to enhance the room coverage of the
conference phone.
If in-line power switch/hub is provided, you don’t need to connect the phone to the power
adapter. Make sure the switch/hub is PoE-compliant.
Important! Do not unplug or remove power to the phone while it is updating firmware
and configurations.