User Guide
Yealink EXP20 User Guide
26
If you leave this field blank, the LCD screen of the EXP20 LCD expansion module will
display the default label “FWD”.
5. Click Confirm to accept the change.
Transfer
You can configure an Ext key as the transfer key. Then you can perform a Blind, Semi-Attended
or Attended transfer by pressing the transfer key during a call.
To configure an Ext key as the transfer key:
1. Click on Dsskey->Ext Key.
2. In the desired Ext key field, select Transfer from the pull-down list of Type or leave it blank.
3. Enter the destination number you want to transfer the calls to in the Value field or leave it
blank.
If a destination number is configured, the active call will be directly transferred by pressing
the transfer key without consulting.
4. Enter the desired value in the Label field or leave it blank.