User Guide

Yealink EXP20 User Guide
32
If you leave this field blank, the LCD screen of the EXP20 LCD expansion module will
display the default label “Record.
4. Click Confirm to accept the change.
URL Record
You can configure an Ext key as the URL record key. Then you can record calls using the URL
record method by pressing the URL record key.
To configure an Ext key as the URL record key:
1. Click on Dsskey->Ext Key.
2. In the desired Ext key field, select URL Record from the pull-down list of Type.
3. Enter the URL in the Value field (e.g., http://192.168.0.1).
4. Enter the desired value in the Label field or leave it blank.