User guide

Enterprise IP Phone Using the Advanced Phone Functions
choose DND from the list.
2) Press Confirm button to save the changes.
Redial
If the key is configured as Redial key, press this key under the idle status, it will fetch
the last dialed number, then you can choose a special line to call out by pressing the line
keys.
To assign the key as Redial:
1) Choose Phone->DSS Key ->Memory Key or Line Key, choose one of the key you
want to make the assignment, there is a pull-down menu in the Type field, choose
KeyEvent from the list, then in the Mode field, open the pull-down menu and
choose Redial from the list.
2) Press Confirm button to save the changes.
Call Return
When the key is configured as Call Return key you are allowed to dial out the last phone
call you received.
To assign the key as Call Return:
1) Choose Phone->DSS Key ->Memory Key or Line Key, choose one of the key you
want to make the assignment, there is a pull-down menu in the Type field, choose
KeyEvent from the list, then in the Mode field, open the pull-down menu and
choose Call Return from the list.
2) Press Confirm button to save the changes.
Group Pickup
When you configure a Group Pickup key, you specify the extension that you want to
monitor. Then, when the monitored extension receives a call, you press the key to pick
up the call. If the monitored extension receives multiple incoming calls simultaneously,
the IP Phone UI displays a list of incoming calls. You select a call from this list to start
the conversation.
To assign the key as Group Pickup:
1) Choose Phone->DSS Key ->Memory Key or Line Key, choose one of the key you
want to make the assignment, there is a pull-down menu in the Type field, choose
KeyEvent from the list, then in the Mode field, open the pull-down menu and
choose Group Pickup from the list.
2) In the "Line" field, select a line for which to apply this key, and enter the extension
number you want to pickup.
3) Press Confirm button to save the changes.
- 44 -