User Guide

Basic Call Features
113
2. Select Enabled from the pull-down list of Allow Trans Exist Call.
3. Click Confirm to accept the change.
Blind Transfer
Before performing a blind transfer (except you use dial number method), make sure that the
transfer mode on DSS key is configured as Blind Transfer. For more information on how to
configure it, refer to Configuring Transfer Mode on DSS Key on page 133.
To perform a blind transfer during a call:
1. Press or the Trans soft key during a call.
2. You can do one of the following:
- Enter the number you want to transfer the call to.
Press or the Trans soft key to complete call transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
- Press the Dir soft key, and then select Local Directory. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to Directory
on page 50 for more information).