User Guide

Customizing Your Phone
67
To upload a custom logo via web user interface:
1. Click on Features->General Information.
2. Select Custom logo from the pull-down list of Use Logo.
3. Click Browse to locate the logo file from your local system.
4. Click Upload to upload the file.
Note
Headset Use
If you want to use a headset, physically connect your headset and activate the headset mode for
use. For more information on physically connecting a headset, refer to Phone Installation on
page 25.
Note
Headset Mode Activation/Deactivation
To activate the headset mode:
1. Press on the phone.
The headset icon appears on the idle screen.
Press the line key or the Answer soft key to answer an incoming call. The call will be
Delete item will appear after you upload a custom logo, you can click Delete to delete the
custom logo.
The logo file format must be *.dob, contact your system administrator for more information.
A custom logo can be uploaded via web user interface only.
To use headset, make sure the headset mode is enabled. Contact your system administrator
for more information.