User Guide

User Guide for the SIP-T21(P) E2 IP Phone
74
Usage:
1. Press the LDAP key to access the LDAP search screen.
2. Enter a few continuous characters of the contact name or continuous numbers of the
contact number using the keypad.
The contacts whose name or phone number matches the characters entered will appear on
the LCD screen.
Note
Conference
You can use this key feature to set up a conference call. For more information, refer to
Conference on page 117.
Dependencies: Type (Key Event)
Key Type (Conf)
Label (key label displayed on the LCD screen)
Value (the number you want to add to the conference)
Usage: Press the Conference key during an active call to set up a conference with the number
specified in the Value field.
Note
Forward
You can use this key feature to forward an incoming call to someone else. For more information,
refer to Call Forward on page 104.
Dependencies: Type (Key Event)
Key Type (FWD)
Label (key label displayed on the LCD screen)
Value (the number you want to forward to)
Usage: Press the Forward key to forward an incoming call to the number specified in the
Value field.
Note
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
If the Value field is left blank, the Conference key performs the same as the Conf soft key during
a call.
If the Value field is left blank, the Forward key performs the same as the FWD soft key when
receiving an incoming call.
LDAP is disabled by default. For more information, contact your system administrator.