User guide

Yealink IP Phones Auto Provisioning Guide
104
Parameter
Permitted
Values
Descriptions
Web Setting Path
1-Server
The default value is 0.
It takes effect after a reboot.
syslog.server
IP address or
domain name
It configures the IP address or domain name
of the syslog server when exporting log to the
syslog server.
The default value is blank.
It takes effect after a reboot.
Note: It works only if the value of the
parameter “syslog.mode” is set to 1 (Server).
Settings->Configuration->Server
Name
syslog.log_level
Integer from 0
to 6
It configures the detail level of syslog
information to be exported. It takes effect
after a reboot.
0: system is unusable
1: action must be taken immediately
2: critical condition
3: error conditions
4: warning conditions
5: normal but significant condition
6: informational
Settings-> Configuration-> System
Log Level