User guide

Yealink IP Phones Auto Provisioning Guide
122
Parameter
Permitted
Values
Descriptions
Web Setting Path
dial, transfer or BLF/BLF list key.
0-New Call
1-Attended Transfer
2-Blind Transfer
The default value is 2.
transfer.multi_call_trans_enable
0 or 1
It enables or disables the IP phone to select
transferee’s call (a new call or another
existing call) during multiple calls when user
presses the Tran/Transfer soft key or
TRAN/TRANSFER key.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the user can select to
transfer the active call to a new call or
another existing call during multiple calls
when the user presses the Tran/Transfer soft
key or TRAN/TRANSFER key.
If it is set to 0 (Disabled), the user can transfer
the active call to a new call during multiple
calls when the user presses the Tran/Transfer
soft key or TRAN/TRANSFER key.
Features->General Information->
Allow Trans Exist Call