User guide

Appendix
207
Parameter
Permitted
Values
Descriptions
Web Setting Path
Note: It works only if the value of the
parameter “features.intercom.allow” is set to
1 (Enabled).
features.intercom.tone
0 or 1
It enables or disables the IP phone to play a
warning tone when automatically answering
an intercom call.
0-Disabled
1-Enabled
The default value is 1.
Note: It works only if the value of the
parameter “features.intercom.allow” is set to
1 (Enabled).
Features->Intercom->Intercom Tone
features.intercom.barge
0 or 1
It enables or disables the IP phone to
automatically answer an incoming intercom
call while there is already an active call on
the IP phone.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will
handle an incoming intercom call like a
waiting call while there is already an active
Features->Intercom->Intercom Barge