User guide

Appendix
209
Parameter
Permitted
Values
Descriptions
Web Setting Path
key.
If it is set to a value greater than 0, the IP
phone will wait the designated seconds
before dialing out the predefined hotline
number when you lift the handset, press the
speakerphone key or press the line key.
The default value is 4.
features.caller_name_type_on_dialing
1, 2 or 3
It configures the account information
displayed on the top left corner of the LCD
screen the when the IP phone is in the
pre-dialing or dialing screen.
1-Label
2-Display Name
3-User Name
The default value is 1.
Features->General Information->
Display Method on Dialing
account.X.auto_dial_enable
(X ranges from 1 to 3)
0 or 1
It enables or disables the IP phone to first dial
out a pre-configured number when a user
dials out a call using account X.
0-Disabled
1-Enabled
If it is set to 1(Enabled), the phone will first