User guide

Appendix
95
Parameter
Permitted
Values
Descriptions
Web Setting Path
Note: It is required for all 802.1x
authentication methods except EAP-TLS.
network.802_1x.root_cert_url
URL within 511
characters
It configures the access URL of the CA
certificate when the 802.1x authentication
method is configured as EAP-TLS,
EAP-PEAP/MSCHAPV2,
EAP-TTLS/EAP-MSCHAPV2, EAP-PEAP/GTC,
EAP-TTLS/EAP-GTC or EAP-FAST.
The default value is blank.
It takes effect after a reboot.
Note: The format of the certificate must be
*.pem, *.crt, *.cer or *.der. It is only applicable
to EAP-TLS, EAP-PEAP/MSCHAPV2,
EAP-TTLS/EAP-MSCHAPV2, EAP-PEAP/GTC,
EAP-TTLS/EAP-GTC and EAP-FAST protocols.
Network-> Advanced->802.1x->CA
Certificates
network.802_1x.client_cert_url
URL within 511
characters
It configures the access URL of the device
certificate when the 802.1x authentication
method is configured as EAP-TLS.
The default value is blank.
It takes effect after a reboot.
Note: The format of the certificate must be
Network->Advanced->802.1x->Devic
e Certificates