Manualshelf

User Guide

ManualsBrandsYealink ManualsOffice ElectronicsYealink [8-Pack] T27G IP Phone, 6 Lines. 3.66-Inch Graphical LCD. USB 2.0, Dual-Port Gigabit Ethernet, 802.3af PoE, Power Adapter Not Included (SIP-T27G-8)
131132133134135136137138139140
User Guide for the SIP-T27G IP Phone
124
Call forward is configurable via web user interface at the path Features->Forward&DND.
Note
To configure the forward authorized numbers via web user interface:
1. Click on Features->Forward&DND.
2. Select Enabled from the pull-down list of Forward Emergency.
3. Enter the numbers in the Forward Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When call forward is activated on the phone, the phone cannot forward incoming calls
from the numbers specified in the Forward Authorized Numbers field.
Note
To deactivate call forward in phone mode:
Do one of the following:
- Press when the phone is idle.
- Press Menu->Features->Call Forward.
You can also enter the SIP URL or IP address in the Forward to field. For more information on
using the SIP URL or IP address, refer to Placing Calls on page 100.
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different between servers. For more information, contact your system
administrator.
Forward authorized number is configurable via web user interface only.