User Guide

Customizing Your Phone
77
introduced in the following. The SIP-T27G IP phone supports 21 line keys and 14 programable
keys.
Line Keys
You can assign predefined functionalities to line keys. You can also define a label for a line key
feature which will appear on the LCD screen. Line keys allow you to quickly access features such
as recall and voice mail. The line key LEDs will indicate the monitored status when the line keys
are assigned with particular features, such as BLF. The default key type of line key 1-6 is Line.
The default key type of line key 7-21 is N/A, which indicates that this line key provides no
functionality until configuration.
To assign functionality to a line key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired line key, and then press the Enter soft key.
3. Select the desired key type from the Type field.
4. (Optional.) Select the desired key event type from the Key Type field.
5. (Optional.) Select the desired line from the Account ID field.
6. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
7. (Optional.) Enter the corresponding value in the Value field.
8. (Optional.) Enter the corresponding value in the Extension field.
9. Press the Save soft key to accept the change or the Back soft key to cancel.
Line key is configurable via web user interface at the path Dsskey->Line Key.
Note
You can assign functionalities to 21 line keys. These 21 line keys are indicated on three pages.
When you assign functionality to line keys located in line key 1-8, the labels of line keys are
indicated on the first page. The following figure shows an example:
When the phone is idle, you can also long press the line key to configure it directly on the phone.