User Guide

Basic Call Features
151
3. Press or , or the Switch soft key to select Enabled from the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code or Off
Code field.
If on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate call waiting on the server. It is not available on all servers.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Call waiting is configurable via web user interface at the path Features->General Information.
Note
Conference
You can create a conference with other two parties using the phone’s local conference. You can
create a conference between an active call and a call on hold (on the same or another line) by
pressing or the Conference soft key. The SIP-T29G also supports network conference.
Note
Local Conference
The SIP-T29G IP phone supports up to 3 parties (including yourself) in a conference call. This is
the default method of conference called Local Conference.
Note
To set up a local conference call:
1. Place a call to the first party.
Network conference is not available on all servers. For more information, contact your system
administrator.
If on code or off code is not configured, the call waiting may not take effect. It depends on your
server. Contact your server administrator for more information.
To set up a local conference call, make sure local conference feature is enabled. For more
information, contact your system administrator.