User guide

Yealink Auto provisioning User Guide
10
account.6.label =
#Configure the display name of account6
account.6.display_name =
#Configure the user name and password for register authentication
account.6.auth_name =
account.6.password =
#Configure the register user name
account.6.user_name =
#Configure the SIP server address and port (5060 by default)
account.6.sip_server_host =
account.6.sip_server_port = 5060
You can configure the phone features via the parameters in the configuration files. You
can also customize your phone with a personalized ringtone, language or logo.
Yealink IP phones have built-in system ringtones and the default ring type is Ring1. You
can change the ring type, or you can customize your personal ringtone and make it take
effect via auto provisioning.
The ringtone file must use PCMU audio format, mono channel, 8K sample rate and 16 bit
resolution.
The ringtone file format must be .wav.
All ringtone files uploaded must be within 100KB.
####################################################
## Configure the access URL of the customizing ringtone ##
####################################################
ringtone.url =
#ringtone.delete =h ttp://localhost/all
#Delete all the custom ringtones uploaded thro ugh auto provision
ringtone.delete =
For example: enter “ftp://192.168.1.100/Ring9.wav” in the “ringtone.url =” field. During
the auto provisioning process, the phone links to the provisioning server “192.168.1.100”,
and downloads the ringtone file “Ring9.wav ”.
You’d better check that the ringtone file has been uploaded to the root directory of the
server before provisioning.
For more information about customizing a ringtone file, you can refer to the Customizing a