User guide

Getting Started

The parameters commonly edited in the Common CFG file (T2xP as an example) are

detailed as following:

####################################################

## Common CFG File ##

####################################################

#!version:1.0.0.1

##File header "#!version:1.0.0.1" cannot be edited or deleted.##

#Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address

#Require reboot

network.internet_port.type = 0

#Configure the static IP address, submask, gateway and DNS server for the phone

#Require reboot

network.internet_port.ip = 192.168.1.10

network.internet_port.mask = 255.255.255.0

network.internet_port.gateway =192.168.1.1

network.primary_ dns= 202.101.103.55

network.secondary_dns = 202.101.103.54

#Configure the PC port type;0-Router,1-Bridge(default)

#Require reboot

network.bridge_mode = 1

#LAN port as Router settings

#Require reboot

network.pc_port.ip = 10.0.0.1

network.pc_port.mask = 255.255.255.0

network.pc_port.speed_duplex = 0

network.pc_port.dhcp_server = 1

network.dchp.start_ip = 10.0.0.10

network.dchp.end_ip = 10.0.0.100

#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default)

auto_provision.pnp_enable = 1

#Set the auto provisioning mode (0-Disabled (default), 1-Power on, 4-Repeatedly,

#5-Weekly, Power on + Repeatedly, Power on + Weekly)

auto_provision.mode = 1

auto_provision.power_on_enable = 1

auto_provision.repeat.enable = 0

auto_provision.repeat.minutes = 1440