Operation Manual

User Guide for the SIP-T40P IP Phone
104
You may need to configure the call park code/call park number or park retrieve
code/park retrieval number before using call park feature. You can also configure a call
park key and retrieve park key. For more information, refer to DSS Keys on page 57.
Note
To configure call park feature in FAC mode via web user interface:
1. Click on Features->Call Pickup.
2. Select FAC from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call,
and the Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park code in the Call Park Code field.
It is configured for the Park soft key. This call park code will also apply to the call
park key. For more information, refer to DSS Keys on page 57.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
It is configured for the Retrieve soft key. This call park code will also apply to the
retrieve park key. For more information, refer to DSS Keys on page 57.
The call park code/call park number can be configured for either the Park soft key or a
call park key. It is applicable to both the Park soft key and call park key.
The park
retrieve code/park retrieval number can be configured for either the Retrieve
soft key or a retrieve park key. It is applicable to both the Retrieve soft key and retrieve
park key.
The call park code/call park number and park retrieve code/park retrieval number are
predefined on the system server. Contact your system administrator for more
information.