Operation Manual

Basic Call Features
105
6. Click Confirm to accept the change.
Note
To park a call in FAC mode:
1. During a call, press the Park soft key (You may need to press the More soft key to
see the Park soft key) or the call park key (If configured).
- If the call park code is not configured, you need to enter the call park code.
Press , or the Park soft key.
- If the call park code is configured, the phone will dial the configured call park
code shown as below:
2. Do one of the following:
a) If you want to park the call against the local extension.
1) Press .
If the call is parked successfully, you will hear a voice prompt confirming
that the call is parked.
b) If you want to park the call against desired extension.
1) Enter an extension where you want to park the call.
2) Press or .
If the call is parked successfully, you will hear a voice prompt confirming
that the call is parked. The call is parked against the extension you
entered.
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select
Disabled from the pull-down list of Custom Softkey via web user interface at path
Settings->Softkey Layout.