Operation Manual

User Guide for the SIP-T40P IP Phone
106
To retrieve a parked call in FAC mode:
1. Do one of the following:
- If the park retrieve code is not configured, dial the park retrieve code (e.g.,
*88).
- If the park retrieve code is configured, press the Retrieve soft key on the
dialing screen or retrieve park key (if configured) on the IP phone.
The phone will dial the configured park retrieve code and the Retrieve screen
appears as below:
2. Follow the voice prompt, do one of the following:
- Press on the phone where the call is parked.
- Enter the desired extension follow by # (e.g., 4603#) on any phone.
To configure call park feature in transfer mode via web user interface:
1. Click on Features->Call Pickup.
2. Select Transfer from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call,
and the Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park number in the Call Park Code field.
It is configured for the Park soft key. This call park number will also apply to the call
park key. For more information, refer to DSS Keys on page 57.
5. (Optional.) Enter the park retrieval number in the Park Retrieve Code field.