Operation Manual

User Guide for the SIP-T40P IP Phone
140
To configure the call pull feature access code via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the call pull feature access code (e.g., *11) in the Call Pull Feature Access
Code field.
4. Click Confirm to accept the change.
The phone will dial out ―*11‖ automatically when you press the CallPull soft key.
This section provides you with detailed information on using the SIP-T40P IP phone in a
SCA Hybrid Key System scenario. In a SCA Hybrid Key System scenario, the status of the
line key LED which associates with a shared line will change. For more information on
line key LED indicators, refer to LED Instructions on page 4.
You can do the following using the IP phone in a SCA Hybrid Key System scenario:
 Placing calls
 Answering calls
 Placing a call on hold
 Retrieving a held call
 Barging in an active call
 Call Pull