Operation Manual

User Guide for the SIP-T40P IP Phone
54
You can upload your custom logo which will be shown on the idle screen.
To upload a custom logo via web user interface:
1. Click on Features->General Information.
2. Select Custom logo from the pull-down list of Use Logo.
3. Click Browse to locate the logo file from your local system.
4. Click Upload to upload the file.
Note
If you want to use a headset, physically connect your headset and activate the headset
mode for use. For more information on physically connecting a headset, refer to Phone
Installation on page 13.
Delete item will appear after you upload a custom logo, you can click Delete to delete
the custom logo.
The logo file format must be *.dob, contact your system administrator for more
information.
Logo customization is configurable via web user interface only.