Operation Manual

User Guide for the SIP-T40P IP Phone
60
Usage: Press the DSS key on your phone to park a call.
Note
DTMF
You can use this key feature to send the specification of arbitrary key sequences via
DTMF.
Dependencies: Type (Key Event)
Key Type (DTMF)
Label (key label displayed on the LCD screen)
Value (DTMF sequence)
Usage: Press the DSS key during an active call to send the key sequence specified in the
Value field.
Note
Prefix
You can use this key feature to add a specified prefix number before the dialed number.
You can only configure the SoftKey (1-4) as the prefix key.
Dependencies: Type (Key Event)
Key Type (Prefix)
Label (key label displayed on the LCD screen)
Value (the prefix number)
Usage: Press the DSS key when the phone is idle, the phone will then enter the dialing
screen and display the prefix number that you specified in the Value field. You can enter
the remaining digits and then dial out.
Local Group
You can use this key feature to quickly access a contact group in the local directory. For
more information, refer to Local Directory on page 38.
Dependencies: Type (Key Event)
Key Type (Local Group)
Local Group (the contact group name you want to access)
Label (key label displayed on the LCD screen)
Usage: Press the DSS key to access the contact group specified in the Local Group field.
DTMF sequence can only contain "0-9", "*", "#".
The call park key is also available for other accounts that are registered on the same
server, and the SIP server type of other accounts must be set to Star2Star. For more
information on SIP server type, contact your system administrator.