Operation Manual

User Guide for the SIP-T40P IP Phone
62
specified in the Value field.
Note
Forward
You can use this key feature to forward an incoming call to someone else. For more
information, refer to Call Forward on page 91.
Dependencies: Type (Key Event)
Key Type (FWD)
Label (key label displayed on the LCD screen)
Value (the number you want to forward to)
Usage: Press the DSS key to forward an incoming call to the number specified in the
Value field.
Note
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies: Type (Key Event)
Key Type (Tran)
Label (key label displayed on the LCD screen)
Value (the number you want to transfer to)
Usage:
 When the transfer mode on DSS key is Blind Transfer, press the DSS key to complete
the blind transfer to the number specified in the Value field.
 When the transfer mode on DSS key is Attended Transfer, press the DSS key to dial
out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
 When the transfer mode on DSS key is New Call, press the DSS key to place a new
call to the number specified in the Value field.
Note
If the Value field is left blank, the DSS key performs the same as the FWD soft key when
receiving an incoming call.
If the Value field is left blank, the DSS key performs the same as the Conf soft key during
a call.
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode via Dsskey.
If the Value field is left blank, the DSS key performs the same as the Tran soft key during a
call. For more information, refer to Call Transfer on page 98.