Operation Manual

Customizing Your Phone
67
for more information.
5. If you use the outbound proxy servers, do the following:
1) Press or , or the Switch soft key to select Enabled from the Outbound
Status field.
2) Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval
field respectively. Contact your system administrator for more information.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
You can repeat steps 2 to 6 to register more accounts.
To disable an account via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Accounts.
2. Select the desired account and then press the Enter soft key.
3. Select Disabled from the Active Line field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Account registration is configurable via web user interface at the path
Account->Register.
Note
You can configure multiple line keys to associate with an account. This enhances call
visualization and simplifies call handling.
If this is the case, the LCD screen will resemble the following figure:
Incoming calls to this account will be distributed evenly among the available line keys.
Default account can be set by pressing or on the idle screen. It has priority
when placing a call. The phone’s default account cannot be changed after reboot.