User Guide
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Packaging Contents
- Phone Installation
- Network Connection
- Phone Initialization
- Phone Status
- Basic Network Settings
- Wireless Network Settings
- Registration
- Idle Screen
- Entering Data and Editing Fields
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Appendix
- Index
User Guide for the SIP-T41S IP Phone
172
The list of calls appears on the LCD screen of phone B.
2. Press or to select the active call.
The Cancel, Call Pull, New Call and Barge In soft keys appear when the active call is
highlighted.
3. Press the Barge In soft key to interrupt the active call of phone A.
Party B may hear a warning tone and then set up a conference call with the other parties of
the active call.
4. Press the Hold or the End Call soft key.
- If any party in the conference call presses the Hold soft key, two-way voice can be
heard between the remaining parties.
- If party A or party B presses the End Call soft key, the remaining parties are still
connected. If the other party (not the shared line party) presses the End Call soft key,
the conference call is ended.
Call Pull
Call pull feature allows users to retrieve an existing call from another shared phone that is in
active or hold status. For example, when there is a call between phone A and phone C, you can
use call pull feature on phone B to retrieve this call from phone A. Then the call is established
between phone B and phone C.
To retrieve a call from another shared phone:
If there is an active call between phone A and phone C, do the following:
1. Long press the desired line key on phone B.
The Cancel, Call Pull, New Call and Barge In soft keys appear on the LCD screen of phone
B.
2. Press the Call Pull soft key.
The active call has been retrieved from the phone A successfully.