User Guide

User Guide for the SIP-T41S IP Phone
76
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies: Type (Key Event)
Key Type (Transfer)
Label (key label displayed on the LCD screen)
Value (the number you want to transfer to)
Usage:
 When the transfer mode via DSS key is Blind Transfer, press the Transfer key to complete
the blind transfer to the number specified in the Value field.
 When the transfer mode via DSS key is Attended Transfer, press the Transfer key to dial
out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
 When the transfer mode via DSS key is New Call, press the Transfer key to place a new
call to the number specified in the Value field.
Note
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies: Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Usage:
1. Press the Hold key during an active call to place the call on hold.
2. Press the Hold key again to retrieve the held call.
DND
You can use this key feature to activate or deactivate the DND mode. You can also use this key
feature to access the custom DND screen. For more information, refer to Do Not Disturb (DND)
on page 102.
Dependencies: Type (Key Event)
Key Type (DND)
Label (key label displayed on the LCD screen)
Usage:
When DND is in phone mode:
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode via Dsskey.
If the Value field is left blank, the Transfer key performs the same as the Transfer soft key
during a call. For more information, refer to Call Transfer on page 112.