User Guide
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Packaging Contents
- Phone Installation
- Network Connection
- Phone Initialization
- Phone Status
- Basic Network Settings
- Wireless Network Settings
- Registration
- Idle Screen
- Entering Data and Editing Fields
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Appendix
- Index
User Guide for the SIP-T41S IP Phone
88
Live Dialpad
You can enable live dialpad feature on the SIP-T41S IP phone, which enables the IP phone to
automatically dial out a phone number without pressing the send key. You can also configure a
delay, and then the phone will dial out the phone number automatically after the designated
period of time.
To enable live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
The default delay time is 4.
4. Click Confirm to accept the change.
Note
Hotline
You can dial a hotline number immediately upon lifting the handset, pressing the Speakerphone
key or the line key. You can also configure a delay, and then the phone will dial out the hotline
number automatically after the designated period of time.
To configure the hotline number via phone user interface:
1. Press Menu->Features->Hot Line.
2. Enter the desired number in the Hotline Number field.
3. Enter the delay time (in seconds) in the Hotline Delay field.
The valid values range from 0 to 10 (seconds) and the default value is “4”.
Live dialpad is configurable via web user interface only.