User Guide

User Guide for the T46G Skype for Business phone
102
Auto answer is configurable via web user interface at the path Account->Basic->Auto Answer.
Note
Call Waiting
You can enable or disable call waiting on the phone. If call waiting is enabled, you can receive
another call while there is already an active call on the phone. Otherwise, another incoming call
is automatically rejected by the phone with a busy message when there is an active call on the
phone. You can also enable or disable the phone to play a warning tone when receiving another
call.
To configure call waiting via phone user interface:
1. Press ->Features>Call Waiting.
2. Press or , or the Switch soft key to select Enabled from the Call Waiting field.
3. Press or , or the Switch soft key to select Enabled from the Play Tone field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
To use the call waiting:
1. When the phone receives an incoming call during a call, press to see the incoming call.
The phone LCD screen displays as below:
Auto answer is only applicable when there is no other call in progress on the phone.