User Guide

User Guide for the T46G Skype for Business phone
18
Phone Initialization
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The LCD screen displays
"Welcome Initializing…Please wait" during the initialization.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4 network
settings (e.g., IP address, subnet mask, default gateway address and DNS address) by default.
After the phone finishes the initialization, the sign-in screen appears on the LCD screen.
Note
Signing into Skype for Business
After the initialization, the idle screen appears. The screen will be shown as below:
You can press Menu soft key to enter the menu screen before signing into the Skype for
Business Server. The menu screen is shown as below:
From the menu screen, you can view phone status, message, configure call features or phone
settings.
If your network does not use DHCP, proceed to Basic Network Settings on page 36.