Specifications

User Guide for the SIP-T46G IP Phone

place a call using the headset automatically. For more information on using the

headset to place a call, refer to Placing Calls on page 87.

To deactivate the headset mode:

1. Press again on the phone.

The HEADSET key LED goes out when the headset mode is deactivated.

You can use headset in priority when headset prior feature is enabled. This feature is

especially useful for permanent or full-time headset users.

To enable headset prior via web user interface:

1. Click on Features->General Information.

2. Select Enabled from the pull-down list of Headset Prior.

3. Click Confirm to accept the change.

To use headset prior, you should activate the headset mode in advance:

1. Physically connect the headset.

2. Press to activate the headset mode.

Note

If headset prior is enabled, the headset mode will not be deactivated until you press the

HEADSET key again.

If headset prior is disabled, the headset mode can be deactivated by pressing the

speakerphone key or the HEADSET key.

Headset prior is configurable via web user interface only.