Yealink Network Technology CO., LTD Yealink VC200 Video Conferencing Endpoint Quick Start Guide V32.3 Applies to firmware version 80.32.0.
Package Contents OK VC200 Codec VCR11 Remote Control AAA Battery×2 PSE 1/4”-20 UNC Screw 3m Ethernet Cable 2m Ethernet Cable (CAT5E FTP cable) Power Cord PoE Adapter Cable Tie×5 1.8m HDMI Cable (for the display device) Quick Start Guide We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. Use the Yealink original PoE adapter (54V/0.56A) to charge the endpoint only.
Mount on a Wall You can purchase a bracket to mount your endpoint on a wall. The recommended height is 1.6m above the ground. Hole depth: 30mm Hole diameter: 6mm 2 T4×30 screws m 48m 1 Expansion bolts 3 1/4”-20 UNC screw Mount onto a TV Stand or a Tripod You need to purchase a TV stand or a tripod separately. The TV stand or a tripod should be able to bear a weight of at least 5kg.
Endpoint Connections Display 1.8m HDMI Cable 3m Ethernet Cable Choose one of the following: Wired network: using 2m Ethernet cable Wireless network: do not connect an Ethernet cable PSE Sharing Content You can choose wired sharing or wireless sharing method to share PC content. You need to purchase the desired accessories. Wired Sharing VCH50 Codec Audio MINI DP HDMI or HDMI Cable PC 7.5m Ethernet Cable 1.2m 1.
CP960 Conference Phone Connections You can purchase CP960 conference phone separately, it can act as the audio input or output device. PSE 3m Ethernet Cable VCH50 Audio MINI DP VC Hub/Phone port on VC200 codec 7.5m Ethernet Cable 2m Ethernet Cable CP960 Codec HDMI If you do not need the VCH50 video conferencing hub to share content, You can connect PSE of CP960 conference phone to the VC Hub/Phone port directly.
3. Select the desired platform from the pull-down list of Platform Type. 4. Configure the desired platform and log in. Traditional Deployment If you deploy endpoint in the head office, make sure it is reachable from public network. If you deploy endpoint in the branch office, use intelligent traversal to deploy it or just follow the same steps as for the head office. Head Office If you deploy endpoint in the head office, at least one static public IP address is required to allow branch offices to connect.
Option1: Deploy the endpoint following the same steps as for the head office. In this way, both inbound and outbound calls are available. Option2: Deploy the endpoint using intelligent traversal. You only need to assign a private IP address to your endpoint. Make sure this private IP address can access the public network. Only outbound calls are available when using this method.
About Yealink Yealink (Stock Code: 300628) is a global leading unified communication (UC) terminal solution provider that primarily offers video conferencing systems and voice communication solutions. Founded in 2001, Yealink leverages its independent research and development and innovation to pursue its core mission: “Easy collaboration, high productivity.” The company’s high-quality UC terminal solutions enhance the work efficiency and competitive advantages of its customers in over 100 countries.
