User Manual

3. Select the desired platform from the pull-down list of Platform Type.

4. Configure the desired platform and log in.

Traditional Deployment

If you deploy endpoint in the head office, make sure it is reachable from public network.

If you deploy endpoint in the branch office, use intelligent traversal to deploy it or just follow the

same steps as for the head office.

Head Office

If you deploy endpoint in the head office, at least one static public IP address is required to allow

branch offices to connect.

Do one of the following to deploy endpoint:

Option1: Assign a static public IP address to your endpoint.

Option2: If you deploy endpoint in an Intranet (behind the firewall), assign a static private IP address

to it and do port mapping on the firewall.

Configure a Static IP

The following introduces how to use the remote control to configure a static IPv4 address:

1. Select More->Network->Wired Network (Default Admin Password:0000).

2. Select IPv4 from the pull-down list of IP Mode.

3. Select IPv4, and then press OK key.

4. Uncheck the DHCP checkbox.

5. Enter the IP address, subnet mask, gateway and DNS information in corresponding fields.

6. Save the change.

The screen prompts “Reboot now?”

7. Select

to reboot the

endpoint

Configure Port Mapping

If you deploy endpoint in an Intranet, you must forward the following ports to the public network on

the firewall, so that your endpoint can receive a public-to-private call.

Branch Office

If you deploy endpoint in the branch office, do one of the following to deploy it:

ort

Function

H.323 signal port

SIP（ optional ）

Audio & Video media stream port

Web management port（ optional ）

Protocol Type

UDP/TCP

5060-5061

443

50000-51000

1719-1720

TCP/UDP

TCP