datasheet
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Customizing the VC800/VC500 Video Conferencing System
- Using the VC800/VC500 Video Conferencing System
- Placing Calls
- Conference Management
- Editing Number before Calling
- Answering or Rejecting Calls
- Ending Calls
- Call Management
- Video Conference Platform
- Using the Yealink VC Cloud Management Service Platform
- Using the Yealink Meeting Server
- Using the StarLeaf Cloud Platform
- Using the Zoom Cloud Platform
- Using the BlueJeans Cloud Platform
- Using the Pexip Platform
- Using the Mind Platform
- Using the Custom Platform
- Using the CPW90 Wireless Expansion Mic
- Using the CPE90 Wired Expansion Mic
- Troubleshooting
- Regulatory Notices
- Appendix A - Time Zones
User Guide for the VC800 Video Conferencing System
108
6. Press or to scroll to OK and then press to delete selected presets.
7. Press to return.
Clearing the Stored Preset
To clear the stored presets during a video call:
1. Press or to open Talk Menu.
2. Press or to scroll to Other and then press to expand the menu.
3. Press or to scroll to Preset and then press to enter submenu.
4. Select Clear and then press .
5. Press or to scroll to OK and then press to clear all presets.
6. Press to return.
Video Recording
Before recording video, make sure a USB flash driver is connected to VC800/VC500 codec,
VCH50 video conferencing hub or CP960 conference phone and the USB feature is enabled.
The recorded video will be saved in .mkv format and named as the recorded time and date.
Video can be played on either the system itself or on a computer using an application capable of
playing .wav files.
Note
The system supports FAT32 and NTFS format USB flash drive or removable hard drive. When
using the NTFS format, only the first partition is supported.
After the USB flash drive is connected and the USB feature is enabled, the display device will
prompt “USB device available now”. The icon will appear on the status bar of the display
device.