User Guide - VCR20
Table Of Contents
- Contents
- About This Guide
- Getting Started
- Calling
- Local Video Conference
- Using the Yealink VC Cloud Management Service Platform
- Using Yealink Meeting Server
- Using the Third-Party Video Conference Platforms
- Content Sharing
- Using WPP20 Wireless Presentation Pod
- Introduction of the WPP20 Whiteboard Note Toolbar
- Introduction of WPP20 Note Toolbar
- Receiving Shared Whiteboard or Content
- Initiating Whiteboard Sharing on WPP20
- Saving the Content or Whiteboard Picture Locally via WPP20
- Saving/Sharing Whiteboard Source Files via WPP20
- Importing the Whiteboard Source File via WPP20
- Importing an Existing Whiteboard during a Call via WPP20
- Configuring Camera Settings
- Local Screen Layout
- Recording Videos and Screenshots
- Basic Settings
| Getting Started | 10
Icon Description
Received calls (H.323 account/SIP account/IP Call)
Received calls (Cloud platform)
Missed calls (H.323 account/SIP account/IP Call)
Missed calls (Cloud platform)
Local directory
Yealink Cloud contacts or YMS contacts
Virtual Meeting Room (VMR)
Room system
Running the Setup Wizard
The setup wizard appears automatically at the first time when you start up the system or reset the system
to factory. You can configure the initial settings, for example the language, the network, and the account, for
the device by your remote control.
Powering on the System
About this task
Your system starts up automatically after you connect an electrical supply. If you power off the system
using the remote control, do the following to power it on.
Procedure
Long press the Hang up key.
Your system is powered on successfully, and the LED indicator glows green.
Powering off the System
Procedure
1. Long press the Hang up key for 3s.
The option pops up on the display.
2. Select Shut down.