User Guide - VCR20
Table Of Contents
- Contents
- About This Guide
- Getting Started
- Calling
- Local Video Conference
- Using the Yealink VC Cloud Management Service Platform
- Using Yealink Meeting Server
- Using the Third-Party Video Conference Platforms
- Content Sharing
- Using WPP20 Wireless Presentation Pod
- Introduction of the WPP20 Whiteboard Note Toolbar
- Introduction of WPP20 Note Toolbar
- Receiving Shared Whiteboard or Content
- Initiating Whiteboard Sharing on WPP20
- Saving the Content or Whiteboard Picture Locally via WPP20
- Saving/Sharing Whiteboard Source Files via WPP20
- Importing the Whiteboard Source File via WPP20
- Importing an Existing Whiteboard during a Call via WPP20
- Configuring Camera Settings
- Local Screen Layout
- Recording Videos and Screenshots
- Basic Settings
| Local Video Conference | 14
The DND icon is displayed in the status bar of the monitor. The system will reject all incoming calls
automatically.
Rejecting Incoming Calls
Procedure
Press Hang up Key or go to Reject.
Ending Calls
Procedure
Press Hang up Key.
Local Video Conference
Local video conference should involve at least three parties, and the following introduces how to initiate
and control the local video conference.
You can also use the wireless Presentation Pod software to control the local video conference.
The differences between a local conference and a cloud server/YMS server conference are as
below:
• The built-in MCU is integrated into the video conferencing system and provides a few conference control
functions One video call with a presentation and 5-way voice calls (a conference moderator and 6
participants).
• The cloud server/YMS server conference is integrated into a separate device (such as the cloud server/
YMS server). You need to log into the Cloud account/YMS account on the endpoint. The cloud/YMS
conference has more conference control functions and provides higher performance and processing
capabilities than the local conference.
Note: In a cloud or YMS call, the call is merged into a local conference after you receive a new call.
Note: If you cannot invite the third contact when you in a P2P call, contact your administrator.
• Creating a Conference by Inviting Contacts
• Turning off the Local Camera
• Controlling the Local Video Conference
Creating a Conference by Inviting Contacts
You can invite contacts during a call to initiate a conference.
Procedure
1. Press the OK key to open the Talk Menu during a call.
2. Select Invite.