User Guide - VCR20
Table Of Contents
- Contents
- About This Guide
- Getting Started
- Calling
- Local Video Conference
- Using the Yealink VC Cloud Management Service Platform
- Using Yealink Meeting Server
- Using the Third-Party Video Conference Platforms
- Content Sharing
- Using WPP20 Wireless Presentation Pod
- Introduction of the WPP20 Whiteboard Note Toolbar
- Introduction of WPP20 Note Toolbar
- Receiving Shared Whiteboard or Content
- Initiating Whiteboard Sharing on WPP20
- Saving the Content or Whiteboard Picture Locally via WPP20
- Saving/Sharing Whiteboard Source Files via WPP20
- Importing the Whiteboard Source File via WPP20
- Importing an Existing Whiteboard during a Call via WPP20
- Configuring Camera Settings
- Local Screen Layout
- Recording Videos and Screenshots
- Basic Settings
| Content Sharing | 28
• Remove WPP20 from your computer.
• On the WPP20, press the presentation button.
• On the Yealink Wireless Presentation Pod software, click Stop Sharing.
Note: If you share the whiteboard via WPP20, you need to press the Presentation Button on the
WPP20 Wireless Presentation Pod twice to end the content sharing.
Sharing Content via Apple Device
• Sharing Content via Apple Device
• Stopping Sharing Content via Apple Device
Sharing Content via Apple Device
Before using the Apple device for content sharing, make sure the Airplay feature is enabled and the Apple
device is connected to the wireless AP of the system.
Procedure
1. On your Apple device, tap Settings > General > Airplay.
2. Select Everyone.
The Airplay feature is enabled.
3. The Apple device is connected to the wireless AP of the system.
4. Go to the Control Center.