User Guide - VCR20
Table Of Contents
- Contents
- About This Guide
- Getting Started
- Calling
- Local Video Conference
- Using the Yealink VC Cloud Management Service Platform
- Using Yealink Meeting Server
- Using the Third-Party Video Conference Platforms
- Content Sharing
- Using WPP20 Wireless Presentation Pod
- Introduction of the WPP20 Whiteboard Note Toolbar
- Introduction of WPP20 Note Toolbar
- Receiving Shared Whiteboard or Content
- Initiating Whiteboard Sharing on WPP20
- Saving the Content or Whiteboard Picture Locally via WPP20
- Saving/Sharing Whiteboard Source Files via WPP20
- Importing the Whiteboard Source File via WPP20
- Importing an Existing Whiteboard during a Call via WPP20
- Configuring Camera Settings
- Local Screen Layout
- Recording Videos and Screenshots
- Basic Settings
| Configuring Camera Settings | 36
Enabling Manual Camera Control When in a Call
Procedure
1. In a call, press the OK key to open the Talk Menu, go to More > Camera > Tracking Mode.
2. Select Off.
Adjusting Cameras When not in a Call
Procedure
1. On the idle screen, go to More > Camera Control.
2. Scroll up or down to adjust the focal length.
3. Press the navigation key to adjust the angle of the camera.
Adjusting Cameras When in a Call
Procedure
1. On the Call screen, scroll up or down to adjust the focal length.
2. Press the navigation key to adjust the angle of the camera.
Note: If you are using the Talk Menu, press the Return key to return the Call screen.
Tracking Mode
The tracking mode feature contains auto framing and speaker tracking.With the real-time face detection,
the auto framing feature can automatically adjust the camera according to the number and the position
of the participants, covering every participant in the conference. Moreover, the speaker tracking feature,
based on the auto framing feature, can automatically detect the speaking participant and zoom in his video
image, providing an optimal closeup of the speaker.
Note: After enabling the tracking mode feature, the camera is adjusted automatically and you
cannot control it.
• Enabling Tracking Mode When not in a Call
• Enabling Tracking Mode When in a Call
Enabling Tracking Mode When not in a Call
Procedure
1. On the idle screen, go to More > Camera Control.
2. Press OK Key to display more menus and select Tracking Mode.
3. Select Auto Framing or Speaker Tracking.
Enabling Tracking Mode When in a Call
Procedure
1. In a call, press the OK key to open the Talk Menu, go to More > Camera > Tracking Mode.
2. Select Auto Framing or Speaker Tracking.