User Guide - VCR20
Table Of Contents
- Contents
- About This Guide
- Getting Started
- Calling
- Local Video Conference
- Using the Yealink VC Cloud Management Service Platform
- Using Yealink Meeting Server
- Using the Third-Party Video Conference Platforms
- Content Sharing
- Using WPP20 Wireless Presentation Pod
- Introduction of the WPP20 Whiteboard Note Toolbar
- Introduction of WPP20 Note Toolbar
- Receiving Shared Whiteboard or Content
- Initiating Whiteboard Sharing on WPP20
- Saving the Content or Whiteboard Picture Locally via WPP20
- Saving/Sharing Whiteboard Source Files via WPP20
- Importing the Whiteboard Source File via WPP20
- Importing an Existing Whiteboard during a Call via WPP20
- Configuring Camera Settings
- Local Screen Layout
- Recording Videos and Screenshots
- Basic Settings
| Basic Settings | 44
Video Input Source
The system supports the video input sources both from the camera and the PC. You can change the input
source on your remote control.
• Changing the Video Input Source When not in a Call
• Changing the Video Input Source in a Call
Changing the Video Input Source When not in a Call
Before you begin
To use the PC input source, make sure that your system is connected to a PC.
Procedure
1. Go to More > Setting > Basic > Input Selection.
The screen shows Camera, Camera +PC and PC input sources.
2. Select the desired input source.
• If you select PC, the remote video image is displayed in large window, and the PC content is
displayed in small window (Picture-in-Picture mode).
• If you select Camera+PC, the PC content is displayed in large window, and other video images are
displayed in small window.
• If you select Camera, the remote video image is displayed in large window, and the local video
image is displayed in small window (Picture-in-Picture mode).
Changing the Video Input Source in a Call
Before you begin
If you want to change the video input source to PC, you need to connect the system to the PC.
Procedure
1. In a call, press the OK key to open Talk Menu and go to More > Input Choose.
The monitor display Camera and PC as the input source.
2. Select the desired input source.
You can see the video image displayed by the selected video input source.