User Guide - VCR20
Table Of Contents
- Contents
- About This Guide
- Getting Started
- Calling
- Local Video Conference
- Using the Yealink VC Cloud Management Service Platform
- Using Yealink Meeting Server
- Using the Third-Party Video Conference Platforms
- Content Sharing
- Using WPP20 Wireless Presentation Pod
- Introduction of the WPP20 Whiteboard Note Toolbar
- Introduction of WPP20 Note Toolbar
- Receiving Shared Whiteboard or Content
- Initiating Whiteboard Sharing on WPP20
- Saving the Content or Whiteboard Picture Locally via WPP20
- Saving/Sharing Whiteboard Source Files via WPP20
- Importing the Whiteboard Source File via WPP20
- Importing an Existing Whiteboard during a Call via WPP20
- Configuring Camera Settings
- Local Screen Layout
- Recording Videos and Screenshots
- Basic Settings
| Getting Started | 7
No. Name Description
1 Custom Key
Customize the key function.
The system administrator can customize the key as the Presentation key
(the default value), the Tracking Mode key, the ScreenShot key, the Mute
Speaker key, the Preset key, or the Camera Control key.
2 Mute Key Mute or unmute the microphone
3 Navigation Key
• Navigate to the desired menu item.
• Pan or tilt the camera to adjust the angle.
4 Scroll Wheel
(OK Key)
• Scroll up or down to the desired menu item.
• Press the key to go to the sub-menu or confirm actions
• After selecting the video, scroll up or down to zoom in/out the video.
5 On-hook Key
• End a call or exit a conference call
• Return to the idle screen
• Long press to shut down the system or put the system to sleep
• Press it to power on the system when the system is shut down but not
powered off
6 Off-hook Key Enter the pre-dialing screen, the dialing screen or the answering screen.
7 Back key Return to the previous menu.
8 Volume Key Adjust the speaker volume.
Note: The infrared sensor locates within the LED indicator of camera. Aim the remote control at the
infrared sensor to operate the camera.
Idle Screen
If the video conferencing system has a Yealink Cloud account registered, the monitor (non-touch) idle
screen is as below: